Actions
Bug #7755
openJ1230 toggle queue timeout to turn off filament
Start date:
07/08/2019
Due date:
% Done:
0%
Estimated time:
Affected Version:
Appion/Leginon 3.4
Show in known bugs:
No
Workaround:
Description
Toggle queue timeout icon was able to turn the filament off on the J1230 in the past and now it does not. We would like to have that function back on the J1230 application.
Updated by Anchi Cheng almost 5 years ago
- Status changed from New to In Test
The function is still there, but only if you use toggle timeout in JExposure node, not the one in Presets Manager. Also check the advanced settings of the same node that "Turn emission off upon timeout" is activated. Please use this workaround until I come up with a better solution.
Updated by Anchi Cheng over 3 years ago
- Target version set to Appion/Leginon 3.5
Queue timeout function has been removed in 3.5 We now have only Idle timeout and error notification in PresetsManager. I therefore moved the emission off after timeout also to Presets Manager.
Updated by Anchi Cheng over 3 years ago
- Has duplicate Bug #7570: J1230 toggle queue timeout disabled added
Actions