Project

General

Profile

Actions

Install Appion Packages Shared » History » Revision 7

« Previous | Revision 7/15 (diff) | Next »
Amber Herold, 06/15/2010 03:47 PM


Install Appion/Leginon Processing Packages

Install all the myami python packages except appion using the following script:

cd /your_download_area
cd myami
sudo ./pysetup.sh install

That will install each package, and report any failures. To determine the cause of failure, see the generated log file "pysetup.log". If necessary, you can enter a specific package directory and run the python setup command manually. For example, if sinedon failed to install, you can try again like this:

cd sinedon
sudo python setup.py install

Install the appion python package

The pysetup.py script above did not install the appion package. Since the appion package includes many executable scripts, it is important that you know where they are being installed. To prevent cluttering up the /usr/bin directory, you can specify an alternative path, typically /usr/local/bin, or a directory of your choice that you will later add to your PATH environment variable. Install appion like this:

cd appion
sudo python setup.py install --install-scripts=/usr/local/bin

python-site-package-path: where the installed python packages went:

Python installer put the packages you installed into its site-packages directory. This enables all users on the same computer to access them. The easiest way to discover where your installed package is loaded from by python is to load a module from the package using interactive python command lines like this:

Start the python command line from shell:

python

Import a module from the package. Let's try sinedon here. All packages installed through the above setup.py script should go to the same place.
At the python prompt (python>) type:

import sinedon

If the module is loaded successfully, call the module attribute path (two underscrolls before "path" and two underscrolls after) will return the location of the module it is loaded from

sinedon.__path__
['/usr/lib/python2.4/site-packages/sinedon']

In this case, /usr/lib/python2.4/site-packages/ is your python-site-package-path. If you go to that directory, you will find all the packages you just installed.

Save this value for use later, for bash:

export PYTHONSITEPKG='/usr/lib/python2.4/site-packages'

or C shell
setenv PYTHONSITEPKG '/usr/lib/python2.4/site-packages'

Finally, you will need to set the the MATLABPATH environment variable in order to get the Appion utilities that use Matlab to work.
For bash:

export MATLABPATH=$MATLABPATH:<your_appion_directory>/ace

or C shell
setenv MATLABPATH $MATLABPATH:<your_appion_directory>/ace

Updated by Amber Herold over 14 years ago · 7 revisions