Startup Calibrations » History » Version 6
Amber Herold, 06/24/2010 12:08 PM
| 1 | 1 | Amber Herold | h1. Startup |
|---|---|---|---|
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | h2. Microscope Setup |
||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | |||
| 13 | 6 | Amber Herold | # Setup normal mode configuration and deactivate the low dose kit if you have not done so. |
| 14 | |
||
| 15 | # Align the scope. |
||
| 16 | 1 | Amber Herold | |
| 17 | |||
| 18 | |||
| 19 | h2. Run Leginon Client on the Microscope Computer |
||
| 20 | |||
| 21 | |||
| 22 | 3 | Alex Kadokura | |
| 23 | 5 | Amber Herold | See Instruction in "Start Leginon" Chapter about [[Run Leginon Client on the Microscope Computer|Run Leginon Client on the Microscope Computer]] |
| 24 | 3 | Alex Kadokura | |
| 25 | 1 | Amber Herold | |
| 26 | |||
| 27 | |||
| 28 | |||
| 29 | h2. Start Leginon |
||
| 30 | |||
| 31 | |||
| 32 | |||
| 33 | 5 | Amber Herold | See Instruction in "Start Leginon" Chapter about [[Start Leginon at your main working station remotely|Run Leginon at your main working station]] |
| 34 | 4 | Alex Kadokura | |
| 35 | 1 | Amber Herold | |
| 36 | |||
| 37 | h2. Launch the Application |
||
| 38 | |||
| 39 | |||
| 40 | 5 | Amber Herold | Leginon/Main menu/Application> select "Run...." and choose the application named "Calibrations", select the microscope name as the instrument and the local computer as "main", and then launch the application. |
| 41 | 2 | Amber Herold | |
| 42 | |||
| 43 | ______ |
||
| 44 | |||
| 45 | [[Grids for Calibration|< Grids for Calibration]] | [[Creating Presets for the first time|Creating Presets for the first time >]] |
||
| 46 | |||
| 47 | ______ |