Project

General

Profile

Leginon Homepage » Leginon Manual » Complete Installation »

Installation on the microscope computer » History

# Updated Author Comment
36 02/02/2011 10:55 AM Anchi Cheng Annotate
35 02/02/2011 10:51 AM Anchi Cheng Annotate
34 02/02/2011 10:49 AM Anchi Cheng Annotate
33 10/28/2010 02:23 PM Jim Pulokas added info about using tietztest.py, but that requires running updatecom.py first, so put that higher on the list Annotate
32 07/20/2010 03:06 PM Jim Pulokas Annotate
31 06/02/2010 12:17 PM Jim Pulokas Annotate
30 06/02/2010 12:17 PM Jim Pulokas Annotate
29 06/02/2010 12:16 PM Jim Pulokas Annotate
28 06/02/2010 12:03 PM Jim Pulokas Annotate
27 06/02/2010 12:02 PM Jim Pulokas Annotate
26 06/02/2010 12:01 PM Jim Pulokas Annotate
25 06/02/2010 12:00 PM Jim Pulokas Annotate
24 06/02/2010 11:56 AM Jim Pulokas Annotate
23 06/01/2010 07:23 PM Anchi Cheng Annotate
22 05/28/2010 06:56 PM Anchi Cheng Annotate
21 05/28/2010 06:55 PM Anchi Cheng Annotate
20 05/28/2010 06:49 PM Anchi Cheng Annotate
19 05/28/2010 05:57 PM Anchi Cheng Annotate
18 05/28/2010 05:56 PM Anchi Cheng Annotate
17 05/28/2010 05:44 PM Anchi Cheng Annotate
16 05/23/2010 11:18 PM Anchi Cheng Annotate
15 05/22/2010 10:31 PM Anchi Cheng Annotate
14 05/22/2010 10:31 PM Anchi Cheng Annotate
13 05/20/2010 10:36 PM Anchi Cheng Annotate
12 05/20/2010 10:29 PM Anchi Cheng Annotate
11 05/20/2010 10:10 PM Anchi Cheng Annotate

(51-75/86) Per page: 25, 50, 100