Startup¶

Microscope Setup¶

1. Setup normal mode configuration and deactivate the low dose kit if you have not done so.
    
2. Align the scope.

Run Leginon Client on the Microscope Computer¶

See Instruction in "Start Leginon" Chapter about Run Leginon Client on the Microscope Computer

Start Leginon¶

See Instruction in "Start Leginon" Chapter about Run Leginon at your main working station

Launch the Application¶

Leginon/Main menu/Application> select "Run...." and choose the application named "Calibrations", select the microscope name as the instrument and the local computer as "main", and then launch the application.

< Grids for Calibration | Creating Presets for the first time >