Bug #1711
closedmyamiweb/tomo does not show images after adding label to image in r1642
0%
Description
This might need some investigation in the future on why there was not a label before.
Updated by Anchi Cheng over 12 years ago
- Status changed from New to In Code Review
- Assignee changed from Anchi Cheng to Jim Pulokas
- Target version set to Appion/Leginon 2.2.0
- Affected Version changed from Appion/Leginon 2.1.0 to Appion/Leginon 2.2.0 (trunk)
r16485 searches also Tomography in the label. This might be a problem in the future if the node name is changed. O.K. for now.
Testing:
Go to myamiweb/tomo and click on any tomography tilt series. There should be series of images displayed at the top and the tracking plots in x, y, z displayed.
Anyone can test.
Updated by Jim Pulokas over 12 years ago
- Assignee changed from Jim Pulokas to Anchi Cheng
Anchi, I looked up the revision where test for null was introduced: r10875
the comment for the revision suggests the reason is to "exclude projection".
Does that mean anything to you? Maybe something that no longer exists?
Your new revision seems ok where you test for only Tomography label, or make it slightly more general to account for future label changes, such as: LIKE "%tomo%"
Updated by Anchi Cheng over 12 years ago
- Assignee changed from Anchi Cheng to Jim Pulokas
Jim,
Thanks for spotting this. Yes, excluding projection is essential since the query is used for downloading the tilt series stack. I also added the wild card suggestion of yours r16506
Updated by Sargis Dallakyan almost 7 years ago
- Status changed from In Code Review to Closed