Actions
Bug #419
closedimage of the first target moved by multiple navigator move is out of focus and beam shift is off
Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
05/04/2010
Due date:
% Done:
100%
Estimated time:
Affected Version:
Appion/Leginon 2.0.1
Show in known bugs:
No
Workaround:
Updated by Anchi Cheng over 14 years ago
- Status changed from Assigned to In Code Review
- Assignee changed from Anchi Cheng to Jim Pulokas
- % Done changed from 0 to 100
Revision r13691 fixed this. Presets Manager thinks the current preset is still fa or fc of Focus node when the first exposure target is handled, However, Navigator has changed it to hl. With the typical optimized cycling settings, fc or fa will not cause cycling when it is changed to en at the mag. 2nd and later targets in the same list still cycles as it thinks en is resent to the scope. There might be better solution, but this does work. This fix should also make tomography focusing better. In the past, even if Tomo Focus performs well, Tomography node focus tend to be off. Now we know why.
Updated by Neil Voss over 14 years ago
- Target version set to Appion/Leginon 2.1.0
- Affected Version set to Appion/Leginon 2.0.1
Updated by Jim Pulokas over 14 years ago
- Status changed from In Code Review to In Test
- Assignee changed from Jim Pulokas to Anchi Cheng
- Show in known bugs set to No
looks good. probably no need for further testing, but just making sure before it is closed.
Actions