Project

General

Profile

Actions
Copy link

Feature #4686

closed

configure tcp connection by ip address

Added by Anchi Cheng almost 8 years ago. Updated over 5 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Anchi Cheng
Category:
-
Target version:
Appion - Appion/Leginon 3.4
Start date:
01/02/2017
Due date:
% Done:

0%

Estimated time:
Deliverable:

Description

This gets around the problem of having multiple network card on one machine and the one we need to connect is not the primary address.

Actions
Copy link
 #1

Updated by Anchi Cheng over 6 years ago

missed fei.py and added that in trunk at 4932720f

Actions
Copy link
 #2

Updated by Anchi Cheng over 5 years ago

  • Status changed from Assigned to Closed
  • Target version changed from Appion/Leginon 3.3 to Appion/Leginon 3.4

usage:

If one of the host network address (usually an instrument computer) need customization, copy /myami/pyami/pyami.cfg as pyami.cfg and put it in one of the valid module configuration folders.

Edit it to reflects the hostname and ip mapping. Like this if you are configuring this on leginon_processing_host:

[my ip map]
leginon_processing_host:172.16.3.1

[other ip map]
scope1_support: 172.16.3.128
camera1: 172.16.3.129

Actions
Copy link
 #3

Updated by Anchi Cheng over 5 years ago

  • Subject changed from config tcp connection by ip address to configure tcp connection by ip address
Actions
Copy link

Also available in: Atom PDF