Project

General

Profile

Acquiring summed frame image thru Leginon » History » Version 2

Anchi Cheng, 06/08/2012 03:53 PM

1 1 Anchi Cheng
h1. Acquiring summed frame image thru Leginon
2
3
h2. Camera Configuration
4 2 Anchi Cheng
5 1 Anchi Cheng
Refer to [[DE-12_introduction#Camera_Settings_for_DE-12|introduction]] on the options
6
# Select DE12 as the camera
7
# Uncheck "save raw frames"
8
# Leave "Frames to use" empty to sum up all frames
9
10
h2. acquire [[Bright and Dark reference images]]
11
12
** Leginon does not research references by frame rate and sensor temperature.  If you change either of them, you will need to acquire new references.
13
** Use valid exposure time (multiple of frame time length)
14
** Use long positive readout delay time (>= 2 frame length) to ensure uniform intensity readout on the first recorded frame.
15
** It does not matter whether you save raw frames or not in this process.  Leginon does not use them for corrections.
16
17
# Select DE12 as the camera, configure and uncheck "save raw frames" in the camera configuration of the preset that you want to use