Adding DE-12 to Leginon » History » Version 1
Anchi Cheng, 06/08/2012 09:52 AM
1 | 1 | Anchi Cheng | h1. Installation Guide for DE-12 |
---|---|---|---|
2 | |||
3 | h2. Adding DE-12 and DE Suvey camera to existing Leginon system |
||
4 | |||
5 | Follow instruction on [[Installation_on_the_microscope_computer]]. Set both camera on the same z-plane in instruments.cfg |
||
6 | |||
7 | |||
8 | h2. Testing |
||
9 | |||
10 | * DE-12 is on a computer separated from the microscope. Please read [[Using_Leginon_on_a_system_where_the_microscope_and_camera_are_controlled_by_different_computers]] first. |
||
11 | |||
12 | * Here are the relevant tests: |
||
13 | ** [[Test Network Connection Between Remote and Microscope Computers]] |
||
14 | ** [[Run Leginon Client on the Microscope Computer|Run Leginon Clinet on Both Microscope Computer and the DECamera computer]] |
||
15 | ** [[Start Leginon at your main working station remotely]] |
||
16 | |||
17 | Proceed to test and run it like any other camera with Manual Acquisition. |