Project

General

Profile

Adding DE-12 to Leginon » History » Revision 2

Revision 1 (Anchi Cheng, 06/08/2012 09:52 AM) → Revision 2/16 (Anchi Cheng, 06/08/2012 09:55 AM)

h1. Installation Guide for DE-12 

 h2. Adding DE-12 and DE Suvey camera to existing Leginon system 

 Follow instruction on [[Installation_on_the_microscope_computer]].    Set both camera on the same z-plane in instruments.cfg 


 h2. Testing 

 * DE-12 is on a computer separated from the microscope.    Please read [[Using_Leginon_on_a_system_where_the_microscope_and_camera_are_controlled_by_different_computers]] first. 

 * Here are the relevant tests: 
 ** [[Test Network Connection Between Remote and Microscope Computers]] 
 ** [[Run Leginon Client on the Microscope Computer|Run Leginon Clinet on Both Microscope Computer and the DECamera computer]] 
 ** [[Start Leginon at your main working station remotely]] 

 Proceed to test and run it like any other camera with [[wiki/Leginon_%22Manual_Application%22]] Manual Acquisition.