Adding DE-12 to Leginon » History » Version 3
Anchi Cheng, 06/08/2012 09:55 AM
| 1 | 1 | Anchi Cheng | h1. Installation Guide for DE-12 |
|---|---|---|---|
| 2 | |||
| 3 | h2. Adding DE-12 and DE Suvey camera to existing Leginon system |
||
| 4 | |||
| 5 | Follow instruction on [[Installation_on_the_microscope_computer]]. Set both camera on the same z-plane in instruments.cfg |
||
| 6 | |||
| 7 | |||
| 8 | h2. Testing |
||
| 9 | |||
| 10 | * DE-12 is on a computer separated from the microscope. Please read [[Using_Leginon_on_a_system_where_the_microscope_and_camera_are_controlled_by_different_computers]] first. |
||
| 11 | |||
| 12 | * Here are the relevant tests: |
||
| 13 | ** [[Test Network Connection Between Remote and Microscope Computers]] |
||
| 14 | ** [[Run Leginon Client on the Microscope Computer|Run Leginon Clinet on Both Microscope Computer and the DECamera computer]] |
||
| 15 | ** [[Start Leginon at your main working station remotely]] |
||
| 16 | |||
| 17 | 3 | Anchi Cheng | Proceed to test and run it like any other camera with [[Leginon_%22Manual_Application%22]] |