Actions
Buffer(Ingestion) Server setup » History » Revision 2
« Previous |
Revision 2/6
(diff)
| Next »
Anchi Cheng, 03/11/2019 05:07 PM
Buffer(Ingestion) Server setup¶
NRAMM/SEMC uses a redundant system that keeps pre-processing (frame alignment and ctf estimation) independent between each Krios. The buffer server also has a large enough storage to hold two weeks to a month of movie frames in case primary storage needs service.
- Network:
- To local network: 1x Dual 10GE SFP+ cards (2 ports)
- To the camera computer: 10 GB Fiber direct connection - SFP+ optical module for 10GBASE-LR
- To gpfs RAID: inifiniband - ConnectX-3 VPI adapter card, dual-port QSFP, FDR IB (56Gb/s) / 40GigE, PCIe 3.0 x8 8GT/s
- CPU: 2U Dual 2.1GHz Intel E5-2620 v4
- Memory: 128GB memory (8x 16GB)
- Storage: 9x 8TB 7.2K SATA drives, 1x 120GB SSD drive
- GPU: 2x NVIDIA PNY GeForce GTX 1080.
The software and configuration requirement is described here:
Software requirement for preprocessing¶
The same as any appion processing server.
Two files are essential which we run as root all the time.
- rawtransfer.py (Found in myami/leginon of your git clone) is used to move the movies from camera computer to the buffer server and change its name to match those of the Leginon sum images
- transfermonitor.sh (Found in myami/leginon) is used to move the movies to the primary storage.
- A third program run as cron job that removes frame movies accumulate on the buffer server after they are expired (Not included).
Activate the use of buffer server in leginon database.¶
Run myami/dbschema/tools/buffer_host_setup.py in Leginon environment.
Updated by Anchi Cheng over 5 years ago · 2 revisions