Project

General

Profile

Check list for each autoscreening run » History » Version 2

Anchi Cheng, 08/09/2022 06:21 PM

1 1 Anchi Cheng
h1. Check list for each autoscreening run
2
3
h2. Decide whether you want to just acquire atlas or go through the full MSI workflow in the autoscreening
4
5
h2. Have an example session that has the settings to go through the workflow without interruption :  No queuing at any Targeting node.
6
7 2 Anchi Cheng
h2. (Grid mapping Option 1) Setup grid loading list text file
8 1 Anchi Cheng
9
Autoscreen reads a *tab-separated* text file that contains the slot number and the session comment to setup the sequence of grid loading and screening.  The grids will be screened in the order or the list.
10
11 2 Anchi Cheng
Grids can be in different project from the example session, but will be saved under leginon user defined in leginon.cfg.
12 1 Anchi Cheng
13
An example file is attached in this wiki called grid.list
14
15
<pre>
16 2 Anchi Cheng
3    best test grid      project1
17
2    second best test grid        project2
18 1 Anchi Cheng
</pre>
19 2 Anchi Cheng
20
h2. (Grid mapping Option 2) prepare a mental list to enter the order of grid position in cassette (base 1) to screen
21 1 Anchi Cheng
22
h2. Check aperture positions
23
24
If you have set special aperture position for Grid node, you need to set the apertures at the position you want for high magnification imaging (Exposure node).  This default will be what leginon will return to after individual node finishes its acquisition task.