Leginon

h1.  configure pyamicfg for host-ip pairings 

Feature #4686 was created to handle the case that the computer host default its IP mapping to a card not the one to connect to leginon need.

h2.  [[add_host|create the require ip mappings ]] in/etc/hosts (or on Winodows: C:\\WINDOWS\system32\drivers\etc\hosts)

h2. Create specific host-ip pairing in pyami.cfg

# The template is myami/pyami/pyami.cfg.template in your myami git clone.  Copy the template file to your global myami configuration directory.  You should know where that is thru [[locate global config directory on Windows| this instruction ]]

# find out the name and ip addresses of the hosts that this computer needs to connect to.

# rename the copy as *pyami.cfg*

# edit pyami.cfg according to the mappings

<pre>

[my ip map]

my-k3-computer: 192.168.0.1

[other ip map]

my-microscop-computer: 192.168.0.2

my-leginon-computer: 192.168.0.3

my-database-server: 192.168.0.4

</pre>

h2. Testing

If you have done either python setup.py installation or PYTHONPATH mapping to the myami directories, you should be able to test.

h3. On Windows, double click your_myami_clone\pyami\mysocket.py

h3. On Linux, type in terminal

<pre>

cd your_myami_clone/pyami

python mysocket.py

</pre>

If the host ip mapping are correct, you should get [OK] in the tests.

<pre>

my-k3-computer ip mapping [OK]

my-microscope-computer ip mapping [OK]

my-leginon-computer ip mapping [OK]

my-database-server ip mapping [OK]

</pre>