Dose Calibrator » History » Version 1
Amber Herold, 04/23/2010 09:54 AM
| 1 | 1 | Amber Herold | h1. Dose Calibrator |
|---|---|---|---|
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | The Dose Calibrator calculates the electron dose at the current scope and camera state |
||
| 6 | using the beam current of the Tecnai microscope. The information in term is used to calibrate |
||
| 7 | the sensitivity of the CCD using the recorded dose measurement in counts/electron. |
||
| 8 | Alternatively, a sensitivity value is directly inputted. |
||
| 9 | |||
| 10 | <highlights> |
||
| 11 | |||
| 12 | Optional bindings for using preset instrument configuration: |
||
| 13 | |||
| 14 | <simplelist> |
||
| 15 | <member>PresetsManagerNode - (PresetChangedEvent) -> DoseCalibrationNode</member> |
||
| 16 | </simplelist> |
||
| 17 | </highlights> |
||
| 18 | |||
| 19 | Other than standard Calibrator settings and tools, the calibrator node contains tools to |
||
| 20 | move main microscope view screen to required position, and entries required for dose |
||
| 21 | conversion. Dose calibration is only as accurate as the screen-current scale factor. |