Dose Calibrator » History » Revision 2
Revision 1 (Amber Herold, 04/23/2010 09:54 AM) → Revision 2/4 (Amber Herold, 04/27/2010 02:32 PM)
h1. Dose Calibrator
The Dose Calibrator calculates the electron dose at the current scope and camera state
using the beam current of the Tecnai microscope. The information in term is used to calibrate
the sensitivity of the CCD using the recorded dose measurement in counts/electron.
Alternatively, a sensitivity value is directly inputted.
<highlights>
Optional bindings for using preset instrument configuration:
<simplelist>
<member>PresetsManagerNode - (PresetChangedEvent) -> DoseCalibrationNode</member>
</simplelist>
</highlights>
Other than standard Calibrator settings and tools, the calibrator node contains tools to
move main microscope view screen to required position, and entries required for dose
conversion. Dose calibration is only as accurate as the screen-current scale factor.
______
[[Corrector|< Corrector]] | [[Drift Manager|Drift Manager >]]
______