Dose Calibrator » History » Version 4
Amber Herold, 06/25/2010 12:40 PM
| 1 | 1 | Amber Herold | h1. Dose Calibrator |
|---|---|---|---|
| 2 | |||
| 3 | 3 | Eric Hou | The Dose Calibrator calculates the electron dose at the current scope and camera state using the beam current of the Tecnai microscope. The information in term is used to calibrate the sensitivity of the CCD using the recorded dose measurement in counts/electron. Alternatively, a sensitivity value is directly inputted. |
| 4 | 1 | Amber Herold | |
| 5 | 4 | Amber Herold | *Optional bindings for using preset instrument configuration:* |
| 6 | 1 | Amber Herold | |
| 7 | 3 | Eric Hou | PresetsManagerNode - (PresetChangedEvent) -> DoseCalibrationNode |
| 8 | 1 | Amber Herold | |
| 9 | 3 | Eric Hou | Other than standard Calibrator settings and tools, the calibrator node contains tools to move main microscope view screen to required position, and entries required for dose conversion. Dose calibration is only as accurate as the screen-current scale factor. |
| 10 | 2 | Amber Herold | |
| 11 | ______ |
||
| 12 | |||
| 13 | [[Corrector|< Corrector]] | [[Drift Manager|Drift Manager >]] |
||
| 14 | |||
| 15 | ______ |