FEI TecnaiTitan installation specifics » History » Revision 13
Revision 12 (Anchi Cheng, 09/28/2015 10:47 AM) → Revision 13/27 (Anchi Cheng, 11/03/2015 10:04 PM)
h1. FEI TecnaiTitan installation specifics h2. Extra Package and Installation {{include(Comtypes_installer)}} |TEM Scripting or Tecnai Scripting|Request this when purchasing the microscope|Required| |TomMoniker Scripting|Should come with TEM Scripting|Required| |Low Dose Server Library|Should come with the microscope if low dose kit was purchased|Required only if you want to use low dose kit with Leginon's Manual Application| h3. Run checkcom.py updatecom.py * From a command line window: <pre>cd C:\python27\Lib\site-packages\pyscope C:\python27\python.exe updatecom.py</pre> * The output should at least find typelib for sould contain <pre> TEM Scripting Found TOMMoniker 1.0 Type Library done. </pre> and EITHER ONE of these outputs. The other one would get an error which you can ignore. <pre> TOM Moniker Found TEM Scripting done. Found Tecnai Scripting done. </pre> h2. instruments.cfg cs is *constant for sperical abberation* For Tecnai series: <pre> [TEM] class: tecnai.Tecnai cs: 2.0e-3 </pre> For Titan: <pre> [TEM] class: tecnai.Tecnai cs: 2.7e-3 </pre> For Krios (different compustage) <pre> [TEM] class: tecnai.Krios cs: 2.7e-3 </pre> h2. Testing with pyscope In python command <pre> from pyscope import tecnai t = tecnai.Tecnai() t.getMagnification() </pre> or for Krios <pre> from pyscope import tecnai t = tecnai.Krios() t.getMagnification() </pre> You should get the current magnification at the microscope when the main viewing screen is up h2. Trouble Shooting [[unable to initializ Tecnai interface error]] h2. Programs to open before Leginon Client: None