Gatan K2 Installation Pyscope Test » History » Version 12
Anchi Cheng, 01/30/2018 07:32 PM
| 1 | 3 | Anchi Cheng | # Start DigitalMicrograph |
|---|---|---|---|
| 2 | 5 | Anchi Cheng | # From python command line or IDLE:<pre> |
| 3 | 1 | Anchi Cheng | import pyscope.dmsem |
| 4 | k = pyscope.dmsem.GatanK2Counting() |
||
| 5 | k.setExposureTime(200) |
||
| 6 | k.getImage()</pre> |
||
| 7 | 4 | Anchi Cheng | |
| 8 | {{include(pyscope_test_result array)}} |
||
| 9 | 6 | Neil Voss | |
| 10 | 11 | Anchi Cheng | h4. Testing frame saving |
| 11 | |||
| 12 | 12 | Anchi Cheng | You can continue the test above by saving frames, too. |
| 13 | |||
| 14 | 10 | Anchi Cheng | {{include(pyscope_test_k2_save_frames)}} |
| 15 | 9 | Anchi Cheng | |
| 16 | 6 | Neil Voss | h4. testing energy filter |
| 17 | |||
| 18 | # Start DigitalMicrograph |
||
| 19 | # From python command line or IDLE:<pre> |
||
| 20 | import pyscope.dmsem |
||
| 21 | k = pyscope.dmsem.GatanK2Counting() |
||
| 22 | k.getEnergyFiltered() |
||
| 23 | k.getEnergyFilter() |
||
| 24 | 7 | Neil Voss | k.setEnergyFilter(True) |
| 25 | k.getEnergyFilter() |
||
| 26 | k.setEnergyFilter(False) |
||
| 27 | k.getEnergyFilter() |
||
| 28 | 8 | Neil Voss | k.getEnergyFilterWidth() |
| 29 | 6 | Neil Voss | </pre> |