Project

General

Profile

Actions

Gatan K3 installation and setup » History » Revision 4

« Previous | Revision 4/11 (diff) | Next »
Anchi Cheng, 03/21/2019 05:28 PM


Gatan K3 installation and setup

Gatan K3 installation and setup is identical to K2 except the instrument.cfg and the additional dmsem.cfg settings below.

instruments.cfg

  • A template for instruments.cfg is in the installed pyscope directory as "instruments.cfg.template". Copy it to
    C:\Program Files\myami\instruments.cfg
  • Remove SimCam modules in the configuration.

Gatan K3 Instruments.cfg

The camera modes are configured as separate cameras as follows.

  • K3 is natively Super Resolution. Use binning of 2x2 to get counted camera effect.
[Gatan K3]
class: dmsem.GatanK3
zplane: 50
width: 8184
height: 11520

dmsem.cfg

Updated by Anchi Cheng over 5 years ago · 4 revisions