Project

General

Profile

Actions

How to Update from v16 (Microscope Windows Computer) » History » Revision 4

« Previous | Revision 4/21 (diff) | Next »
Anchi Cheng, 05/21/2010 12:06 AM


How to Update from v16 (Microscope Windows Computer)

The changes from v1.6 requires update of all in-house components of Leginon, dbemtools and database but not the php-mrctools.
Don't forget that you need to also update the packages on the microscope-controlling computer
since the pyScope update need to be synchronized.

See Installation Troubleshooting and Leginon Bulletin Board searching
for "install" if you run into problems.

Packages required from NRAMM

All Leginon (and Appion) packages distributed from NRAMM are now under one svn control.

A few updates are needed for preparation of python 3.0 compatibility where the method for importing module is changed. They will still run under python 2.4 and up.
Here are the packages you need to install with python installer

SVN subPackage Name Reason for update:
numextension package import method change
libcv package import method change
leginon new features
pyami new features
sinedon required for updating database
pyscope new method for creating pythoncom modules
imageviewer debug

Because numextension and libcv requires extra compiler, we have created
window installer for them for python 2.5 and made them available through http://www.leginon.org/

Check out SVN Source Files from the depository

Assuming that you have installed some kind of svn client such as TortoiseSVN "http://tortoisesvn.tigris.org/", you can use your mouse to do the following
*Create Leginon2.0 directory somewhere at your convenience
*Change directory into Leginon2.0
*Right-click the mouse botton in this directory window and select Tortoise svn
Checkout in the menu:!http://emg.nysbc.org/software/leginon/images/images/svnmenu.png!
*Set up svn checkout window like this, but check out from http://emg.nysbc.org/svn/myami/trunk and save it to Leginon2.0 folder

Perform system check if you can't remember where you have installed your Leginon before.

*Go to ~/Leginon2.0/leginon
*Double click on syscheck.py

You should have all the supporting packages installed for v1.6. If you see any lines like "*** Failed...", then you have something missing. Otherwise, everything should result in "OK".

Uninstall your existing packages:

Although new installation overwrite the old in most cases, problem has been observed in
the past. Therefore, it is best to remove the old files before new installation.

Use "Add or Remove Programs" application in "Control Panel" to do this. Leginon related
packages are shown with prefix "Python 2.5"

If you didn't use Installer to install previously, the packages may not show up in the
Programs list. Simply remove or rename the folder containing the old packages in this case.

Move your existing packages to a backup directory:

At the beginning of the syscheck.py output, the location of the exisiting Leginon folder is shown. Although new installation overwrite the old in most cases, problem has been observed in the past. Therefore, it is best to remove the old files from the path before new installation. Better yet, copy into a backup folder because we need some configuration files from them.

For example, your Leginon folder is at C:\\python25\Lib\site-packages\Leginon

Go to C\\python25\site-packages
Create Leginon1_6_backup folder
Move Leginon fold into Leginon1_6_backup folder

Be aware that in some cases the installed package name is different (capitalized) from your svn package name and that numextension amd libCV are not in its own subdirectory in the python library but just the compiled .so files

Install the subpackages you downloaded from NRAMM svn depository

  • Start a command line Window from Start Menu
  • Reinstall the package in each folder with commands such as
    cd Your_Download_Place\Leginon 2.0\leginon
    c:\\python25\python.exe setup.py install
  • run syscheck.py again to make sure you have everything.

Copy your Leginon1.6 sinedon.cfg to the new installation

  • Find your sinedon.cfg. Depending on your previous setting, look in the directories listed here in order:
    *your home directory as described in syscheck.py
    *The sinedon directory where it is called from. If unsure, start python command line and type these to find out:
    python> import sinedon
    python> sinedon
  • If sinedon.cfg reside in the installed sinedon subpackage, you should copy it from your Leginon1.6 backup to the new installation.
    go to  C:\\python25\Lib\site-packages\
    copy Leginon_1_6_backup\sinedon\sinedon.cfg  into the new sinedon folder
    

Updated by Anchi Cheng over 14 years ago · 4 revisions