How to Update from v21 (Microscope Windows Computer) » History » Version 10
Anchi Cheng, 06/07/2012 01:59 PM
1 | 1 | Anchi Cheng | h1. How to Update from v21 (Microscope Windows Computer) |
---|---|---|---|
2 | |||
3 | Instruction is similar to [[How to Update from v20 (Microscope Windows Computer)]] |
||
4 | |||
5 | * If you have done [[TEM_Scripting Beam Tilt Calibration]] and have changed the scale factor in tecnai.py, you should copy the value to your new installation. |
||
6 | 5 | Anchi Cheng | * If you want to avoid copying cfg files to new installation in the future, copy it to the global config directory |
7 | |||
8 | {{include(locate global config directory on Windows)}} |
||
9 | 1 | Anchi Cheng | |
10 | 3 | Anchi Cheng | h2. Modify pyscope/instruments.cfg |
11 | 1 | Anchi Cheng | |
12 | 6 | Anchi Cheng | Starting from 2.2, Cs values are saved with the scope in instruments.cfg that need to match the value saved in the database. Also a z-plane needs to be assigned to each camera |
13 | |||
14 | 3 | Anchi Cheng | {{include(Instrumentscfg_for_22)}} |
15 | 2 | Anchi Cheng | ______ |
16 | |||
17 | 10 | Anchi Cheng | [[How_to_Update_from_v21_(Linux)|< How to Update from v2.1 (Linux) ]] | [[Check Cs value match before using Leginon after update|Check Cs value match before using Leginon after upgrade >]] |
18 | 2 | Anchi Cheng | |
19 | |||
20 | ______ |