How to Update from v21 (Microscope Windows Computer) » History » Revision 10
Revision 9 (Anchi Cheng, 06/07/2012 01:59 PM) → Revision 10/13 (Anchi Cheng, 06/07/2012 01:59 PM)
h1. How to Update from v21 (Microscope Windows Computer) Instruction is similar to [[How to Update from v20 (Microscope Windows Computer)]] * If you have done [[TEM_Scripting Beam Tilt Calibration]] and have changed the scale factor in tecnai.py, you should copy the value to your new installation. * If you want to avoid copying cfg files to new installation in the future, copy it to the global config directory {{include(locate global config directory on Windows)}} h2. Modify pyscope/instruments.cfg Starting from 2.2, Cs values are saved with the scope in instruments.cfg that need to match the value saved in the database. Also a z-plane needs to be assigned to each camera {{include(Instrumentscfg_for_22)}} ______ [[How_to_Update_from_v21_(Linux)|< How to Update from v2.1 (Linux) ]] | [[Check Cs value match before using Leginon after update|Check Cs value match before using Leginon after upgrade update >]] ______