Project

General

Profile

How to Update from v30 (Instrument Windows Computer) » History » Revision 4

Revision 3 (Anchi Cheng, 08/12/2014 05:26 PM) → Revision 4/8 (Anchi Cheng, 08/12/2014 05:29 PM)

h1. How to Update from v30 (Instrument Windows Computer) 

 The changes to v3.1 DOES require upgrade at the microscope and camera computers. 

 See [[Installation Troubleshooting]] and    "Leginon Bulletin Board":http://emg.nysbc.org/projects/leginon/boards    searching 
 for "install" if you run into problems. 

 h2. copy the old config files to the global location if you still use local files 

 {{include(locate global config directory on Windows)}} 

 |_config file_|likely location in 3.0 installation if not in your home directory| 
 |sinedon.cfg|C:\\python27\Lib\site-packages\sinedon\| 
 |leginon.cfg|C:\\python27\Lib\site-packages\leginon\config\| 
 |instruments.cfg|C:\\python27\Lib\site-packages\pyscope\| 

 h2. Enter Tietz PXL camera imaging size in instruments.cfg if needed in this format: 

 <pre> 
 [camera] 
 tietz.TietzPXL 
 zplane:10 
 height: 2048 
 width: 2048 
 </pre> 

 h2. About [[TEM Scripting Beam Tilt Calibration]] 

 * If you have done [[TEM_Scripting Beam Tilt Calibration]] and have changed the scale factor in tecnai.py, you should copy the value to your new installation. 

 h2. Gatan K2 Summit camera 

 Check and modify pyscope/dmsem.py for new configuration needed for the camera to indicate its DM version, orientation, and file saving location.    More details in [[Gatan_K2_installation_and_setup#(Version-3.1)-Define-local-configuration]] [[Gatan_K2_installation_and_setup]] 

 <pre> 
 # DM Version 
 DM_VERSION = '2.30.542.0' 
 # the value in DM camera config 
 K2_CONFIG_FLIP = True 
 # multiple of 90 degrees (i.e. put 1 if 90 degrees, 3 if 270 degrees) 
 K2_CONFIG_ROTATE = 3 
 # raw frame base directory. Use '\\' as path separator 
 RAW_FRAME_DIR = 'D:\\frames\\' 
 </pre> 
 ______ 

 [[How_to_Update_from_v30_(Linux)|< How to Update from v3.0 (Linux) ]]  


 ______