Install SerialEM DigitalMicrograph plugin » History » Revision 15
« Previous |
Revision 15/20
(diff)
| Next »
Anchi Cheng, 12/25/2015 10:37 AM
Thanks to David Mastronarde for providing his DM plug-in using socket connection
Note: If you have SerialEM installed on the same computer, you don't have to install this. The same Plugin can be used by both programs and share the same port¶
For your convenience, these are taken from SerialEM download site: http://bio3d.colorado.edu/ftp/SerialEM/ Please match it with your Digital Micrograph version. If you have SerialEM installed, this is included.
| DM version | local copy of SerialEM SEMCCD | description |
| 2.2.x | SEMCCD-GMS2-64.dll | DM for 64-bit GMS 2.0 - 2.2 |
| 2.3.0 | SEMCCD-GMS2.30-64.dll | DM for 64-bit GMS 2.30 |
| 2.3.1, 2.3.2, 3.0 | SEMCCD-GMS2.31-64.dll | DM for 64-bit GMS 2.31 and above |
| 3.31 and above | SEMCCD-GMS3.31-64.dll | DM for 64-bit GMS 3.31 and above |
Note: DM = Digital Micrograph; GMS = Gatan Microscopy Suite
32bit versions also exit, but not for GMS 2.31 and above
Copy it to C:\ProgramData\Gatan\Plugins\
Set the environment variable SERIALEMCCD_PORT to an unused port between 50000 and 60000 to avoid conflict with other programs. Avoid ports used by Leginon, especially 55555.
Updated by Anchi Cheng about 9 years ago · 15 revisions