Install SerialEM DigitalMicrograph plugin » History » Version 5
Anchi Cheng, 02/04/2014 04:58 PM
| 1 | 4 | Anchi Cheng | This is the latest one that includes a socket interface. If you have recent SerialEM installed, this should already be in place. Make sure that you use SEMCCD-GMS2.3-64.dll if your Digital Micrograph is 2.30 or above. |
|---|---|---|---|
| 2 | |||
| 3 | Download ftp site: ftp://bio3d.colorado.edu/pub/SerialEM/DMpluginBeta/ |
||
| 4 | |||
| 5 | If your Digital Micrograph is prior to 2.30 version, you could also use the earlier working version from our redmine Files: http://emg.nysbc.org/projects/leginon/files |
||
| 6 | 1 | Anchi Cheng | Copy it to C:\Program Files\Gatan\Plugins\ (maybe ProgramData is okay too instead of ProgramFiles) |
| 7 | |||
| 8 | 5 | Anchi Cheng | Set the environment variable SERIALEMCCD_PORT to an unused port between 50000 and 60000 to avoid conflict with other programs. Avoid ports [[Ports_used_by_Leginon| used by Leginon]] |