Installation on the camera computer » History » Revision 18
Revision 17 (Anchi Cheng, 05/17/2021 02:34 AM) → Revision 18/20 (Anchi Cheng, 07/29/2021 02:26 PM)
h1. Specific installation/setup notes for various camera
h2. Tietz
* [[Tietz camera installation and setup]] using directly CAMC4 (older method and preferred if doable)
* or [[Tietz camera installation and setup using EM-MENU]] scripting
h2. Gatan (CCD/CMOS camera)
* [[Gatan on Windows-32|Non-K2/K3 Gatan Camera]]
h2. Gatan K2
* [[Gatan K2 installation and setup]]
* [[instrument.cfg setup on FEI scope where K2 fakes another camera in order to control the shutter]]
h2. Gatan K3
* [[Gatan K3 installation and setup]]
h2. FEI Eagle
* [[Eagle camera installation and setup]]
h2. FEI Ceta
* [[Ceta camera support]]
h2. Falcon I or II/Orius Combination
* [[Falcon camera support]]
h2. Falcon 3EC
* [[Falcon 3 support]]
h2. DE-12/DE-20
* [[Adding_DE-12_to_Leginon|Adding DE direct detectors to Leginon]]
_________
[[installation on the microscope computer 30|< Additional installation specific to the microscope]] | [[Windows Setup After Software Installation|Additional Setup >]]
_________