Installation on the instrument computers¶

Only processing-side of Leginon system is needed. This same procedure should be
performed on EACH instrument computer you want to use Leginon on. Same procedure is to be repeated if new instrument is added.
For situation with the microscope operated at 2 different HT values which gives different magnification set, such as EFTEM mode vs TEM mode, it is better dealt with as different microscope. Adding post-GIF camera on a scope with Leginon installed ... shows how to add a Tecnai subclass to give a new identity to the special mode.

You need to know what microscope and camera you are controlling before starting this.¶

Package Requirement and Download¶

Installation Required by all instruments¶

Configuration related to Leginon¶

Additional installation specific to the microscope¶

Additional installation specific to the camera¶

Additional Setup¶

Trouble shooting with Python IDLE¶

---

Specific notes for various microscopes¶

Installation specific for FEI Tecnai/Titan/Krios running on 32-bit computer or 64-bit computer¶

Installation specific for FEI Talos/Arctica/Glacios with pre-installed 64-bit python¶

Installation specific for JEOL scopes with COM support¶

Jeol 1230 installation specifics¶

Hitachi 7800 installation specifics¶

---

< Installation Required by all instruments | Additional installation specific to the camera >

---

---

Specific installation/setup notes for various camera¶

TVIPS¶

• Tietz camera installation and setup using directly CAMC4 (older method)
• or Tietz camera installation and setup using EM-MENU scripting (workaround on newer system)

Gatan (CCD/CMOS camera)¶

• Non-K2/K3 Gatan Camera

Gatan K2¶

• Gatan K2 installation and setup
• instrument.cfg setup on FEI scope where K2 fakes another camera in order to control the shutter

Gatan K3¶

• Gatan K3 installation and setup

FEI Eagle¶

• Eagle camera installation and setup

FEI Ceta¶

• Ceta camera support

Falcon I or II/Orius Combination¶

• Falcon camera support

Falcon 3EC¶

• Falcon 3 support

DE-12/DE-20¶

• Adding DE direct detectors to Leginon

---

< Additional installation specific to the microscope | Additional Setup >
___

---

< Additional Database Server Setup | Steps needed for Installation Using Database Administration Tools >

---