Installation on the instrument computers¶

Only processing-side of Leginon system is needed.

You need to know what microscope and camera you are controlling before starting this.¶

Package Requirement and Download¶

Installation¶

Configuration related to Leginon¶

Additional Setup¶

---

Specific notes for various microscopes¶

Installation specific for FEI Tecnai/Titan/Krios running on 32-bit computer or 64-bit computer¶

Installation specific for FEI Talos/Arctica/Glacios with pre-installed 64-bit python¶

Installation specific for JEOL scopes with COM support¶

Jeol 1230 installation specifics¶

Hitachi 7800 installation specifics¶

---

< Installation Required by all instruments | Additional installation specific to the camera >

---

---

Specific installation/setup notes for various camera¶

TVIPS¶

• Tietz camera installation and setup using directly CAMC4 (older method)
• or Tietz camera installation and setup using EM-MENU scripting (workaround on newer system)

Gatan (CCD/CMOS camera)¶

• Non-K2/K3 Gatan Camera

Gatan K2¶

• Gatan K2 installation and setup
• instrument.cfg setup on FEI scope where K2 fakes another camera in order to control the shutter

Gatan K3¶

• Gatan K3 installation and setup

FEI Eagle¶

• Eagle camera installation and setup

FEI Ceta¶

• Ceta camera support

Falcon I or II/Orius Combination¶

• Falcon camera support

Falcon 3EC¶

• Falcon 3 support

DE-12/DE-20¶

• Adding DE direct detectors to Leginon

---

< Additional installation specific to the microscope | Additional Setup >
___

---

< Additional Database Server Setup | Steps needed for Installation Using Database Administration Tools >

---