Installation on the instrument computers » History » Revision 8
Revision 7 (Anchi Cheng, 12/08/2016 11:34 PM) → Revision 8/11 (Anchi Cheng, 05/05/2017 01:55 PM)
h1. Installation on the instrument computers Only processing-side of Leginon system is needed. This same procedure should be performed on each instrument computer you want to use Leginon on. Same procedure is to be repeated if new instrument is added. For situation with the microscope operated at 2 different HT values which gives different magnification set, such as EFTEM mode vs TEM mode, it is better dealt with as different microscope. message#2499 shows how to add a Tecnai subclass to give a new identity to the special mode. h3. You need to know what microscope and camera you are controlling before starting this. h2. [[Windows Package Requirement 30|Package Requirement and Download]] h2. [[Windows Installation All|Installation Required by all instruments]] All|Installation]] h2. [[Windows Myami Configuration|Configuration related to Leginon]] h2. [[Windows Setup After Software Installation|Additional Setup]] h2. [[Trouble shooting with Python IDLE]] ____ {{include(installation on the microscope computer 30)}} _____ {{include(Installation on the camera computer)}} ______ [[Additional Database Server Setup after Web Server Installation|< Additional Database Server Setup]] | [[Steps involved in the installation| Steps needed for Installation Using Database Administration Tools >]] ______