JEOL External3 setup » History » Version 5
Anchi Cheng, 03/28/2017 12:29 PM
| 1 | 1 | Anchi Cheng | h1. JEOL TEMExternal3 setup |
|---|---|---|---|
| 2 | |||
| 3 | 2 | Anchi Cheng | JEOL's TEM Server and COM interface can be connected through TEMExternal3 program. It is installed on the Client side. In the case of using the COM on JEM scope PC, it means you need to have it on that same computer. If it is available, you will find TEMExtReg.exe at C:\Program Files\JEOL |
| 4 | |||
| 5 | h2. Find the external network IP address for the computer. |
||
| 6 | |||
| 7 | # Click "Run..." from *Start menu* |
||
| 8 | # Open "cmd" in its dialog. This will open *Command Prompt" |
||
| 9 | # Type ipconfig to list the network configuration on the computer. |
||
| 10 | # Look for the IP address assigned to external subnet. It is likely started with "172.17.41" |
||
| 11 | |||
| 12 | h2. Find the socket numbers TEM server is connected to. |
||
| 13 | 3 | Anchi Cheng | |
| 14 | 4 | Anchi Cheng | # Right-Click on the TEM server icon in the notification area or the Taskbar (right-bottom of the display ) !JeolTEM_Server.png! |
| 15 | 2 | Anchi Cheng | # Write down "Request Port" number and "Notify Port" number |
| 16 | |||
| 17 | 1 | Anchi Cheng | h3. Configure TEMExternal3 |
| 18 | 4 | Anchi Cheng | |
| 19 | 2 | Anchi Cheng | # Open TemExtReg.exe |
| 20 | # Assign the IP address to that of the external subnet IP |
||
| 21 | 5 | Anchi Cheng | # Assign the two port numbers according to those used by the TEM Server with TEMExternal Normal Port assigned to TEM Server Request Port. |
| 22 | 2 | Anchi Cheng | # Close TemExtReg.exe by clicking OK |