Actions
K2 raw frame saving » History » Revision 1
Revision 1/6
| Next »
Anchi Cheng, 07/11/2014 05:30 PM
K2 raw frame saving¶
- Typical frame saving preset parameters for counted/super-resolution: 0.2 s frame exposure time, 4-5 s total exposure time at 8-10 e/physical pixel/s (Some argues that 5 e/physical pixel/s is better). You can use DM's reading of dose rate while it is in counted mode and UNBINNed to get a reasonable estimate.
Camera configuration for frame saving¶
- "Exposure time" specifies the total time in which the frames are saved.
- "Frame time" defines the length of each frame. The minimal value is 50 ms for K2 Summit
- "Frames to use" is not used
- "Readout Delay" is not used
Updated by Anchi Cheng over 10 years ago · 1 revisions