Known Bugs 20 » History » Version 5
Amber Herold, 07/22/2010 09:21 AM
| 1 | 3 | Anchi Cheng | h1. Known Bugs for version 2.0 |
|---|---|---|---|
| 2 | 1 | Anchi Cheng | |
| 3 | |||
| 4 | 5 | Amber Herold | In addition to the bugs listed below, you may view the "Known Bugs Report":http://emg.nysbc.org/projects/leginon/issues?query_id=18 which contains a dynamic list of known bugs. |
| 5 | |||
| 6 | |||
| 7 | |||
| 8 | 4 | Amber Herold | h3. (New for 1.3) Navigator multiple move option does not work properly in MSI imaging |
| 9 | 2 | Anchi Cheng | sequence with image shift as the move type. |
| 10 | |||
| 11 | Temporary solution: Always use preset manager when move type is image shift. |
||
| 12 | |||
| 13 | |||
| 14 | 4 | Amber Herold | h3. Web viewer may not display all targets on the parent image since target is |
| 15 | 2 | Anchi Cheng | transferred to a different version. |
| 16 | |||
| 17 | No temporary solution. |
||
| 18 | |||
| 19 | |||
| 20 | 4 | Amber Herold | h3. Kill Application may not kill all process cleanly and may cause problem in |
| 21 | 2 | Anchi Cheng | connecting to TEM or camera when a new application is reloaded. |
| 22 | |||
| 23 | |||
| 24 | Temporary solution: Close leginon and clients and restart. |
||
| 25 | |||
| 26 | |||
| 27 | 4 | Amber Herold | h3. Simulate Target use the current image shift as the target shift on top of its preset |
| 28 | 2 | Anchi Cheng | shift. Therefore, the acquired image may carry an additional image shift if there is an |
| 29 | offset created from previouis acquisition. |
||
| 30 | |||
| 31 | |||
| 32 | Temporary solution: Always use Presets Manager to send the preset to be used in |
||
| 33 | simulation first before usinging Simulate Targets tool. |
||
| 34 | |||
| 35 | |||
| 36 | 4 | Amber Herold | h3. Some, although fewer, User Notification "processing " icons do not disappear but |
| 37 | 2 | Anchi Cheng | stay pointing up after the node is done. |
| 38 | |||
| 39 | |||
| 40 | Temporary solution: None. |
||
| 41 | |||
| 42 | |||
| 43 | 4 | Amber Herold | h3. When running on LINUX system, Preset selection in /Presets Manager/Importing Presets |
| 44 | 2 | Anchi Cheng | from Another Session/ add a selection when mouse is left-clicked rather than toggle the |
| 45 | selection as in convention. |
||
| 46 | |||
| 47 | |||
| 48 | Temporary solution: Hold down to Ctrl key to select and deselect multiple presets. |
||
| 49 | Shift key still means selecting all between the two clicks. |
||
| 50 | |||
| 51 | |||
| 52 | Note: This problem is caused by some bug in wxPython for LINUX. |
||
| 53 | |||
| 54 | |||
| 55 | 4 | Amber Herold | h3. Web 3way Image viewer does not always show in yellow the revised (i.e. after drift |
| 56 | 2 | Anchi Cheng | correction) current target in the parent image. |
| 57 | |||
| 58 | |||
| 59 | Temporary solution: None. |
||
| 60 | |||
| 61 | |||
| 62 | 4 | Amber Herold | h3. Starting Manual Focus directly by clicking on the tool does not use preset but still |
| 63 | 2 | Anchi Cheng | check for the preset assigned for the focuser node. |
| 64 | 1 | Anchi Cheng | |
| 65 | ______ |
||
| 66 | |||
| 67 | [[Bug Fixes 2.0|< Bug Fixes]] |
||
| 68 | |||
| 69 | ______ |