Lacey Carbon Application » History » Version 2
Anchi Cheng, 03/18/2019 03:40 PM
| 1 | 1 | Anchi Cheng | h1. Lacey Carbon Application |
|---|---|---|---|
| 2 | |||
| 3 | Lacey carbon support has irregular size of holes. Making it difficult to find effiiciently the good area to target. |
||
| 4 | |||
| 5 | *Possible strategies:* |
||
| 6 | |||
| 7 | h2. Manual Targeting, and queue it up. |
||
| 8 | |||
| 9 | pro: minimal false positive and false negative. You decide where you want regarding spacing of the targets and distance from the edge. |
||
| 10 | con: user time-consuming. You have to do this at Exposure Targeting Node for every hl image coming in. |
||
| 11 | |||
| 12 | h2. [[Using MSI-T application to collect Lacey Carbon support data]] |
||
| 13 | |||
| 14 | pro: low false positive. Find most holes on the image and take image at the center of each. |
||
| 15 | con: high false negative. Can not vary the number of images taken in each hole according to the hole size. Focus may fail when it offset to an empty area. |
||
| 16 | |||
| 17 | 2 | Anchi Cheng | h2. [[RasterFC Lacey carbon rastering]] |
| 18 | 1 | Anchi Cheng | |
| 19 | This is a published node class developed by W.V. Nicholson, H. White and J. Trinick (2010) JSB 172, 395-399. |
||
| 20 | |||
| 21 | pro: Raster through the hl image giving maximal number of images. |
||
| 22 | con: high false positive. May take many images on the support film. |