MSI-T PP and MSI-T2 PP Appplication¶

MSI-T PP Application and its two-client version MSI-T2 PP are designed for phase plate workflow.

To use it from myami-beta version, update your myami-beta to the current state.

1. Use Application administration myamiweb tool to import from your-myami-git-clone/leginon/applications/MSI-T2_PP.xml
2. Run this at you-myami-git-clone to import the default settings for the new nodes
   

   python dbschema/tools/import_leginon_settings.py MSI-T_PP
   

Set up AutoIt. See Issue #3786 for example script download.¶

Node Settings¶

MSI-T PP is different from typical MSI-T in several ways mainly to avoid image shift in exposure and to reduce on-plane condition hysteresis by not going to lower mag and/or large defocus after multiple beam-tilt based autofocusing.

1. PP Exposure is set to move to the target by stage position. There is no drift adjustment
2. *PP Focus" has an active option that performs beam tilt in a diagonal direction
3. Extra step of hole centering aimed to minimize the movement required in target process in PP Exposure node. This is done with navigator move in PP Hole", and fixed target position at the center of the parent image in *PP Exposure Targeting.

• The steps from * Grid Targeting* to Hole is similar to other MSI applications. Queuing at Hole Targeting works well and a focus target should be chosen for use in Z Focus node.
• PP Hole Targeting should not include focus target. Set it up for single hole centering, or multi-hole centering if *Hole Targeting were not overlapping but contained multiple holes. O.K. to queue.
• PP Exposure Targeting should not use queuing. Set up as fix targets with acquisition target at the center of the image to avoid stage movement. Set up one or multiple focus target if extra accuracy in defocus is required.

• Phase Plate node settings allow you to set the number of PP Exposure counts before it switches automatically, as well as how long you want to activate the new patch by beam exposure, as well as the activation time for focus spot.

Operation¶

1. Set beam to on-plane condition at a previously used phase plate position. VERY IMPORTANT Use the same beam settings and defocus for en, fa, fc presets. -0.5 um defocus is typical.
2. Open Settings dialog in Phase Plate node, enter the current phase plate slot number (base 1), and the phase plate patch number. Click Update to register.
3. Test a few exposure throught the flow on the old phase plate patch before advance to clean phase plate patch with the green arrow in Phase Plate tool. The exposure should also be reset.