Project

General

Profile

New User Features 31 » History » Revision 3

Revision 2 (Anchi Cheng, 07/08/2014 02:39 AM) → Revision 3/7 (Anchi Cheng, 07/08/2014 03:40 AM)

h1. New User Features 31 

 h2. [[FEI Falcon camera support]] #2254 

  * Acquire summed image thru Leginon 
  * Configure IntermediateConfig.xml for frame saving using FEI's IntermediateImageTool through Leginon 
  * Trigger raw frame saving 
  * [[DDD_raw_frame_file_transfer|Transfer raw frame images off hard drive of FEI PC during data collection to a network drive]]. 
  * [[appion:GainDark_correction_of_the_raw_frame_with_or_without_drift_correction|Compile mrc movie stack thru Appion (with or without alignment)]] Appion]] 

 h2. [[appion:Direct_Detector_Frame_Processing|Falcon Frame alignment (Appion)]] 

  * Parallel gpu processing using program from "Li et. al. Nature Methods (2013)":http://dx.doi.org/doi:10.1038/nmeth.2472. 

 h2. [[Child Imaging Area and Beam Diameter Display in TargetFinder Nodes]] #2812 and #2792 

  * [[Beam Size Calibration]] is required for beam diameter display 

 h2. Ability of sending preset selection to scope in Navigation Node #2816 

 h2. Refresh Targets on grid atlas when returning to "Square Targeting" node panel from another node panel #2818 

 h2. Beam Tilt Imager Node GUI improvement 

 Allow saving of the coma-free beam tilt to database in the node #2780 

 h2. Melt ice on specimen without exposing camera using scope's shuttering mechanism instead of main screen insertion when available #2679 
 panel.