Ports used by Leginon » History » Revision 16
Revision 15 (Anchi Cheng, 12/17/2013 02:07 PM) → Revision 16/20 (Anchi Cheng, 02/04/2014 05:02 PM)
h1. Ports used by Leginon This information is useful if you want to open specific ports between computers with a firewall in between. * MySQL normally uses port 3306 (but configurable in /etc/my.cnf) * Leginon Client running on instrument host: port 55555 * Leginon main program on the processing server: dynamically assigned ports between 49152 and 65535, but most likely only the first one to three in this range. 65535 There is no strict port assignment since we could potentially have more than one Leginon process running on the same linux host talking to different TEM hosts in its original design, even though we've never used it that way. You should hosts. It is probably good enough if you only worry about opening up the first few of those ports in your firewall (maybe 49152 through 49160, or something like that). See more discussion at Leginon bulletin board thread on "Network problem - Leginon not seeing tecnai host":http://emg.nysbc.org/boards/6/topics/3. ______ [[Network Configuration| Go up]] ______