Possible Computer Set-up Configurations » History » Revision 21
Revision 20 (Anchi Cheng, 09/30/2011 12:31 PM) → Revision 21/25 (Anchi Cheng, 10/10/2011 07:19 PM)
h1. Possible Computer Set-up Configurations Computer(s) used for the whole Leginon system need to support five functions: # TEM/Camera control and data output (by python-side packages of Leginon system) *Note:* The computer attached to the microscope/camera is used for this function. Therefore, it is on a Windows computer. # General Leginon operation such as target selection and image processing (processing server of Leginon system) # Image data storage. # Other meta-data storage through MySQL database (by database server of Leginon system) # Web server (using PHP-side of Leginon system). *Important:* The MRC module that is used to load mrc formatted files to the web pages is not compiled on Windows. Therefore, this function must be on a linux box unless you don't need to see the images. The five functions can be distributed to five different computers on a network or all on one single computer (with web server not viewing the images). However, since the latter minimal setup requires the use of the computer attached to the microscope and digital camera for all functions, it is not advisable. Processing server of Leginion is a multi-platform software, meaning it can run on both Microsoft Windows and [[Select Linux distribution to use|Linux]], although we and others have found that Windows have trouble managing its memory for such a demanding task. MySQL used in the database server is also supported by multiple platforms. This is not true for the Web server because the custom php-MRC module used in the web viewer only compiles on linux machines. Therefore, one of the computer not part of the microscope/camera control microscope must be a linux. The following examples show several arrangements that take advantage of distributed system. Other combinations are possible, but will basically be variations on one of the following themes. See special notes on [[Using Leginon on a system where the microscope and camera are controlled by different computers]] if it applies to you. h2. Configuration A * One or more *1 Windows computer that controls (attached to the Microscope and your digital camera ; Microscope) & 1 Linux computer (for all other functions, separate from the Microscope) (Good for single user and small-scale acquisition)* h3. On the microscope/camera computer(s): microscope computer: * Install the latest processing server side of Leginon release (and supporting packages) following [[Installation_on_the_microscope_computer]] h3. On the Linux computer: * Install the full Leginon package including the processing, database, and web server. For testing, the easiest is to follow [[appion:Install_Appion_and_Leginon_using_the_auto-installation_tool]] For manual installation, follow full instruction in this chapter. See [[Minimum_Requirements_and_current_NRAMM_setup]] h2. Configuration B *One or more *1 Windows computers that control computer (attached to the microscope and your digital camera ; Microscope) & 4 Linux computers (one for each function) (Good for multiple microsopes, users and large-scale acquisition)* This is the set-up at NRAMM. It has the processing server side of Leginon installed on the Windows computer attached to the microscope and on the Linux computer that is used for running Leginon. A second Linux machine is dedicated to the database while the web-based viewer is hosted by another server. * Install the python-side Leginon (and supporting packages) on the Windows computer(s) computer controlling the microscope/camera microscope and on the Linux computer that is to run Leginon. You can make the latter installation accessable to any numbers of linux computers on your network. * Install MySQL on a Linux computer served as the database server * Install PHP, the Apache Web Server, and PHP-side of Leginon system on the third Linux computer that will serve as the web server host. * The computer hosting the data storage should be accessable by all linux boxes. The data storage may be on one of these computers that is accessable by the web and the processing computers. See also [[Minimum_Requirements_and_current_NRAMM_setup]] ______ [[What is in this Chapter|< What is in this Chapter]] | [[Select Linux distribution to use|What Linux distribution should be used? >]] ______