Robot node set-up » History » Version 5
Anchi Cheng, 07/15/2010 06:53 PM
| 1 | 5 | Anchi Cheng | h1. Robot node |
|---|---|---|---|
| 2 | 1 | Amber Herold | |
| 3 | |||
| 4 | 5 | Anchi Cheng | Robot node uses Robot2 class which commnunicates to the robot controller through database and robot server specific to the avialable grid-loading robot or robots. The grid tray and grids will not appear unless they are registered in the database. For consistent run, Default Z Position in its settings should be set according to the aproximate eucentric height for the holder used. |
| 5 | 2 | Amber Herold | |
| 6 | |||
| 7 | ______ |
||
| 8 | |||
| 9 | 4 | Anchi Cheng | [[Upload Grids|< Register the grids in the database]] | [[1st Pass application|1st Pass application >]] |
| 10 | 2 | Amber Herold | |
| 11 | ______ |