Project

General

Profile

Running "Manual" Application » History » Revision 4

Revision 3 (Anchi Cheng, 05/22/2010 11:44 PM) → Revision 4/6 (Anchi Cheng, 05/22/2010 11:45 PM)

h1. Running "Manual" Application 



 *    Leginon/Manual> Open the "Settings" tool !http://emg.nysbc.org/software/leginon/images/icons/settings.png! and configure the settings: 


 > > > Important-Use low dose kit option should be set to yes if using the low dose kit on Tecnai. Low Dose Pause Time need to be set to 5 sec or more to complete the mode change. 


 Recommandations- 
 > > > Acquisition/Camera Recommandations-Acquisition/Camera Configuration- use one of the preconfigured selection for binning and size 


 > > > Correct image=yes if dark and bright images of the camera configuration exist. 


 > > > Save image to the database=yes. 


 *    Leginon/manual/Settings> Save and close the settings by pressing "OK" button. 


 *    Adjust the exposure time in the setting and/or beam size/spot size on the scope to achieve the desired dose and coverage in exposure mode, if low-dose kit is used. 


 *    Microscope> Search the grid for interested area and focus as normally performed. 


 *    Microscope> If low dose mode is used, leave TEM in Focus model. Leave the screen at up position if "Main Screen/Up before acquire" is not checked in the settings. No need to put on beam blank. 


 *    Leginon/manual> Click on the "Acquire" tool !http://emg.nysbc.org/software/leginon/images/icons/acquire.png! to acquire the image. 


 *    Microscope> If low dose mode is used, Leginon will force the pre-specimen shutter close, switch the scope to exposure mode to acquire the image and then switch back to the original mode. 

 ______ 

 [[Startup|< Startup]] | [[Advanced Features|Advanced Features >]] 

 ______