Leginon

h1. Running "Manual" Application

*  Leginon/Manual> Open the "Settings" tool !http://emg.nysbc.org/software/leginon/images/icons/settings.png! and configure the settings:

Important-Use low dose kit option should be set to yes if using the low dose kit on Tecnai. Low Dose Pause Time need to be set to 5 sec or more to complete the mode change.

Recommendations-

> > > Acquisition/Camera Configuration- use one of the preconfigured selection for binning and size

> > > Correct image=yes if dark and bright images of the camera configuration exist.

> > > Save image to the database=yes.

*  Leginon/manual/Settings> Save and close the settings by pressing "OK" button.

*  Adjust the exposure time in the setting and/or beam size/spot size on the scope to achieve the desired dose and coverage in exposure mode, if low-dose kit is used.

*  Microscope> Search the grid for interested area and focus as normally performed.

*  Microscope> If low dose mode is used, leave TEM in Focus model. Leave the screen at up position if "Main Screen/Up before acquire" is not checked in the settings. No need to put on beam blank.

*  Leginon/manual> Click on the "Acquire" tool !http://emg.nysbc.org/software/leginon/images/icons/acquire.png! to acquire the image.

*  Microscope> If low dose mode is used, Leginon will force the pre-specimen shutter close, switch the scope to exposure mode to acquire the image and then switch back to the original mode.

______

[[Startup|< Startup]] | [[Advanced Features|Advanced Features >]]

______