Start leginon what is next » History » Version 9
Anchi Cheng, 10/29/2010 07:29 PM
| 1 | 1 | Anchi Cheng | h1. What is next |
|---|---|---|---|
| 2 | |||
| 3 | 9 | Anchi Cheng | * As a superuser who is the Leginon guru in the lab, you should check to see if you need to perform [[Calibrations required on FEI microscopes|certain calibrations directly at the microscope]], and then follow instructions in [[Leginon "Calibrations" Application]] chapter. |
| 4 | 1 | Anchi Cheng | |
| 5 | 7 | Anchi Cheng | * As a system administrator, this is the end of your task for installation. You should have someone who knows how to use the microscope to perform the calibrations. You might want to read about [[Backup Practices]] |
| 6 | 1 | Anchi Cheng | |
| 7 | 5 | Anchi Cheng | * As a regular user, the calibrations should have be done, you should learn how to use the application that interests you. For the start, you should at least know how to use [[Leginon "Manual Application"]]. You are most likely want to use one of the MSI applications. In that case, you should read [[Multi-Scale Imaging Applications in General]] next. |
| 8 | 6 | Anchi Cheng | |
| 9 | ______ |
||
| 10 | |||
| 11 | [[Start Leginon at your main working station remotely|< Start Leginon at your main working station remotely ]] |
||
| 12 | ______ |