Startup » History » Version 1
Amber Herold, 04/22/2010 04:40 PM
| 1 | 1 | Amber Herold | h1. Startup |
|---|---|---|---|
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | h2. Microscope Setup |
||
| 6 | |||
| 7 | |||
| 8 | |||
| 9 | * Setup normal or low dose mode configuration. |
||
| 10 | |||
| 11 | |||
| 12 | * Align the scope. |
||
| 13 | |||
| 14 | |||
| 15 | |||
| 16 | |||
| 17 | |||
| 18 | |||
| 19 | |||
| 20 | h2. Run Leginon Client on the Microscope Computer |
||
| 21 | |||
| 22 | |||
| 23 | |||
| 24 | See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_client">Run Leginon Client on the Microscope Computer</link>" |
||
| 25 | |||
| 26 | |||
| 27 | |||
| 28 | |||
| 29 | |||
| 30 | h2. Start Leginon |
||
| 31 | |||
| 32 | |||
| 33 | |||
| 34 | See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_main">Run Leginon at your main working station</link>" |
||
| 35 | |||
| 36 | |||
| 37 | |||
| 38 | |||
| 39 | |||
| 40 | h2. Launch the Application |
||
| 41 | |||
| 42 | |||
| 43 | Leginon/Main menu/Application> select "Run...." and choose the application named "Manual", select the microscope hostname for "scope" and the local computer as "main", and then launch the application. |