Startup » History » Version 3
Anchi Cheng, 05/22/2010 11:42 PM
| 1 | 1 | Amber Herold | h1. Startup |
|---|---|---|---|
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | h2. Microscope Setup |
||
| 6 | |||
| 7 | |||
| 8 | |||
| 9 | * Setup normal or low dose mode configuration. |
||
| 10 | |||
| 11 | |||
| 12 | * Align the scope. |
||
| 13 | |||
| 14 | |||
| 15 | |||
| 16 | |||
| 17 | |||
| 18 | |||
| 19 | |||
| 20 | h2. Run Leginon Client on the Microscope Computer |
||
| 21 | |||
| 22 | |||
| 23 | |||
| 24 | 3 | Anchi Cheng | See Instruction in "Start Leginon" Chapter about [[Run Leginon Client on the Microscope Computer]] |
| 25 | 1 | Amber Herold | |
| 26 | |||
| 27 | |||
| 28 | |||
| 29 | |||
| 30 | h2. Start Leginon |
||
| 31 | |||
| 32 | |||
| 33 | |||
| 34 | 3 | Anchi Cheng | See Instruction in "Start Leginon" Chapter about [[Start Leginon at your main working station remotely|Run Leginon at your main working station]] |
| 35 | 1 | Amber Herold | |
| 36 | |||
| 37 | |||
| 38 | |||
| 39 | |||
| 40 | h2. Launch the Application |
||
| 41 | |||
| 42 | |||
| 43 | Leginon/Main menu/Application> select "Run...." and choose the application named "Manual", select the microscope hostname for "scope" and the local computer as "main", and then launch the application. |
||
| 44 | 2 | Amber Herold | |
| 45 | |||
| 46 | ______ |
||
| 47 | |||
| 48 | |||
| 49 | [[The Application|< The Application]] | [[Running "Manual" Application|Running "Manual" Application >]] |
||
| 50 | |||
| 51 | |||
| 52 | ______ |