Startup Calibrations » History » Version 2
Amber Herold, 04/27/2010 10:41 AM
1 | 1 | Amber Herold | h1. Startup |
---|---|---|---|
2 | |||
3 | |||
4 | |||
5 | |||
6 | |||
7 | h2. Microscope Setup |
||
8 | |||
9 | |||
10 | |||
11 | |||
12 | |||
13 | * Setup normal mode configuration and deactivate the low dose kit if you have not |
||
14 | done so. |
||
15 | |||
16 | |||
17 | * Align the scope. |
||
18 | |||
19 | |||
20 | |||
21 | |||
22 | |||
23 | |||
24 | |||
25 | |||
26 | |||
27 | h2. Run Leginon Client on the Microscope Computer |
||
28 | |||
29 | |||
30 | |||
31 | See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_client">Run |
||
32 | Leginon Client on the Microscope Computer</link>" |
||
33 | |||
34 | |||
35 | |||
36 | |||
37 | |||
38 | h2. Start Leginon |
||
39 | |||
40 | |||
41 | |||
42 | See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_main">Run |
||
43 | Leginon at your main working station</link>" |
||
44 | |||
45 | |||
46 | |||
47 | |||
48 | |||
49 | h2. Launch the Application |
||
50 | |||
51 | |||
52 | Leginon/Main menu/Application> select "Run...." and choose the application named |
||
53 | "Calibrations", select the microscope name as the instrument and the local computer as |
||
54 | "main", and then launch the application. |
||
55 | 2 | Amber Herold | |
56 | |||
57 | ______ |
||
58 | |||
59 | [[Grids for Calibration|< Grids for Calibration]] | [[Creating Presets for the first time|Creating Presets for the first time >]] |
||
60 | |||
61 | ______ |