Startup Calibrations » History » Revision 2
Revision 1 (Amber Herold, 04/22/2010 04:48 PM) → Revision 2/6 (Amber Herold, 04/27/2010 10:41 AM)
h1. Startup h2. Microscope Setup * Setup normal mode configuration and deactivate the low dose kit if you have not done so. * Align the scope. h2. Run Leginon Client on the Microscope Computer See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_client">Run Leginon Client on the Microscope Computer</link>" h2. Start Leginon See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_main">Run Leginon at your main working station</link>" h2. Launch the Application Leginon/Main menu/Application> select "Run...." and choose the application named "Calibrations", select the microscope name as the instrument and the local computer as "main", and then launch the application. ______ [[Grids for Calibration|< Grids for Calibration]] | [[Creating Presets for the first time|Creating Presets for the first time >]] ______