Startup Calibrations » History » Version 3
Alex Kadokura, 05/28/2010 01:08 PM
| 1 | 1 | Amber Herold | h1. Startup |
|---|---|---|---|
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | h2. Microscope Setup |
||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | |||
| 13 | * Setup normal mode configuration and deactivate the low dose kit if you have not |
||
| 14 | done so. |
||
| 15 | |||
| 16 | |||
| 17 | * Align the scope. |
||
| 18 | |||
| 19 | |||
| 20 | |||
| 21 | |||
| 22 | |||
| 23 | |||
| 24 | |||
| 25 | |||
| 26 | |||
| 27 | h2. Run Leginon Client on the Microscope Computer |
||
| 28 | |||
| 29 | |||
| 30 | |||
| 31 | 3 | Alex Kadokura | See Instruction in "Start Leginon" Chapter about [[Run Leginon Client on the Microscope Computer|Run |
| 32 | Leginon Client on the Microscope Computer]] |
||
| 33 | 1 | Amber Herold | |
| 34 | |||
| 35 | |||
| 36 | |||
| 37 | |||
| 38 | h2. Start Leginon |
||
| 39 | |||
| 40 | |||
| 41 | |||
| 42 | See Instruction in "Start Leginon" Chapter about "<link linkend="test_start_main">Run |
||
| 43 | Leginon at your main working station</link>" |
||
| 44 | |||
| 45 | |||
| 46 | |||
| 47 | |||
| 48 | |||
| 49 | h2. Launch the Application |
||
| 50 | |||
| 51 | |||
| 52 | Leginon/Main menu/Application> select "Run...." and choose the application named |
||
| 53 | "Calibrations", select the microscope name as the instrument and the local computer as |
||
| 54 | "main", and then launch the application. |
||
| 55 | 2 | Amber Herold | |
| 56 | |||
| 57 | ______ |
||
| 58 | |||
| 59 | [[Grids for Calibration|< Grids for Calibration]] | [[Creating Presets for the first time|Creating Presets for the first time >]] |
||
| 60 | |||
| 61 | ______ |