Startup Calibrations » History » Revision 4
Revision 3 (Alex Kadokura, 05/28/2010 01:08 PM) → Revision 4/6 (Alex Kadokura, 05/28/2010 01:09 PM)
h1. Startup h2. Microscope Setup * Setup normal mode configuration and deactivate the low dose kit if you have not done so. * Align the scope. h2. Run Leginon Client on the Microscope Computer See Instruction in "Start Leginon" Chapter about [[Run Leginon Client on the Microscope Computer|Run Leginon Client on the Microscope Computer]] h2. Start Leginon See Instruction in "Start Leginon" Chapter about [[Start Leginon at your main working station remotely|Run "<link linkend="test_start_main">Run Leginon at your main working station]] station</link>" h2. Launch the Application Leginon/Main menu/Application> select "Run...." and choose the application named "Calibrations", select the microscope name as the instrument and the local computer as "main", and then launch the application. ______ [[Grids for Calibration|< Grids for Calibration]] | [[Creating Presets for the first time|Creating Presets for the first time >]] ______