Startup Calibrations » History » Version 5
Amber Herold, 06/23/2010 12:26 PM
| 1 | 1 | Amber Herold | h1. Startup |
|---|---|---|---|
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | h2. Microscope Setup |
||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | |||
| 13 | 5 | Amber Herold | * Setup normal mode configuration and deactivate the low dose kit if you have not done so. |
| 14 | 1 | Amber Herold | |
| 15 | |||
| 16 | * Align the scope. |
||
| 17 | |||
| 18 | |||
| 19 | |||
| 20 | h2. Run Leginon Client on the Microscope Computer |
||
| 21 | |||
| 22 | |||
| 23 | 3 | Alex Kadokura | |
| 24 | 5 | Amber Herold | See Instruction in "Start Leginon" Chapter about [[Run Leginon Client on the Microscope Computer|Run Leginon Client on the Microscope Computer]] |
| 25 | 3 | Alex Kadokura | |
| 26 | 1 | Amber Herold | |
| 27 | |||
| 28 | |||
| 29 | |||
| 30 | h2. Start Leginon |
||
| 31 | |||
| 32 | |||
| 33 | |||
| 34 | 5 | Amber Herold | See Instruction in "Start Leginon" Chapter about [[Start Leginon at your main working station remotely|Run Leginon at your main working station]] |
| 35 | 4 | Alex Kadokura | |
| 36 | 1 | Amber Herold | |
| 37 | |||
| 38 | h2. Launch the Application |
||
| 39 | |||
| 40 | |||
| 41 | 5 | Amber Herold | Leginon/Main menu/Application> select "Run...." and choose the application named "Calibrations", select the microscope name as the instrument and the local computer as "main", and then launch the application. |
| 42 | 2 | Amber Herold | |
| 43 | |||
| 44 | ______ |
||
| 45 | |||
| 46 | [[Grids for Calibration|< Grids for Calibration]] | [[Creating Presets for the first time|Creating Presets for the first time >]] |
||
| 47 | |||
| 48 | ______ |